Welcome To Shenzhen Hongda Industrial Co., Ltd. !

Location:

Home >News >Hongda information
News

Mr.Ye:

0755-89589076

13751081523

Thermal conductivity of silicon sheet production process

发布时间:2021-01-21

浏览次数:3272

In the process of thermal conductivity of silicon sheet production, the main production steps are as follows: preparing raw materials, mix molding, vulcanization collecting, trimming and cutting, inspection, etc. This paper briefly introduces the production process of thermal conductive silicone piece below:

1. Prepare raw materials

The coefficient of thermal conductivity of common organic silicone usually only about 0.2 W/m K. However, in order to improve the coefficient of thermal conductivity, can be mixed in ordinary silicone thermal conductive filler. Is the commonly used thermal conductive filler metal oxides and metal nitrides, the coefficient of thermal conductivity of filler is not only related to material itself, and thermal conductive filler particle size distribution, morphology, interfacial contact and internal bonding degree are closely related. Typically, fiber or foil effect of thermal conductivity of thermal conductive filler is better.

2. The molding and mix

Plastic refining and mixing is a kind of silica gel process, it refers to the mechanical or chemical methods are adopted to decrease the molecular weight and viscosity of rubber raw materials, and improve its plasticity, to obtain the appropriate liquidity, in order to meet the needs of the further processing and mixing and forming. Production of thermal conductivity of silicon sheet materials generally destroyed by mechanical stirring. Mixed color, the milk white silica gel into the sheet material of all sorts of color.

3. The molding sulfide

If you want to make a soft, elastic and resistance to pull the thermal conductivity of silicon sheet, you need to use two vulcanization silicone. Sulfide can actually called curing. After the first phase of heating forming, the crosslinking density of the liquid thermal conductivity silica gel is not enough, further vulcanization reaction can improve the tensile strength of thermal conductive silicone rubber membrane, rebound elasticity, hardness, swelling degree, density and thermal stability, is much better than a cure. Without secondary sulfide, may to a certain extent influence the properties of thermal conductive silicone pieces, unable to obtain better product performance. After the first vulcanization product parameter is different from the secondary sulfide, it also related to the actual operation process and steps.

4. Cutting and cutting

After dealing with the high temperature of thermal conductive silicone piece cannot use other methods of rapid cooling, fast cooling methods will directly influence on the performance of the thermal conductive silicone pad products. And need to place a period of time, such ability after natural cooling cut into different sizes and specifications of the thermal conductive silicone.

5. The finished product inspection

The main inspection items include thermal conductive silicone piece of hardness, volume resistance, pressure resistance, flame retardancy, thickness, temperature tolerance range, coefficient of thermal conductivity, tensile strength, etc.

QR CODE

Tel: 86-755- 89585752 84506630 89589076   Fax: 86-755-89589072   Copyright 2018 Shenzhen Hongda Industrial Co., Ltd. All Rights Reserved